☰ Menu

Guide · HS classification · Chapter 84 and 85 · Duty lines

Vietnam HS Code for Machinery and Industrial Equipment

One voltage figure can move a transformer from 5% import duty to 25%. A Vietnam HS code is read at 8 digits, so capacity and function set the rate, not the word “machine” on your invoice.

Written by our customs desk in Ho Chi Minh City. · Skip to the code table

Vietnam HS code example: 360 degree excavator of heading 84.29 on a Project Shipping lowbed at Tan Thuan Dong port
A 360° excavator on our lowbed at Tan Thuan Dong port, May 2026. This kind of machine sits on line 8429.52.00.
8 digitsthe level at which Vietnam sets duty and policy
2,212 linesin Chapters 84 and 85 of the 2026 tariff file we use
151 of 160recent customs files we handled were flat rack, open top or OOG
2 working hoursto reply once we have the catalogue and specs

Short answer: a Vietnam HS code has 8 digits. The first 6 follow the World Customs Organization’s HS system, and the last 2 come from the ASEAN nomenclature used in Vietnam’s list. Machinery mostly falls in Chapter 84 and electrical equipment in Chapter 85. Duty and policy are then read on that exact line.

This guide is for freight agents, EPC contractors and factory owners shipping equipment to Vietnam. Below are real duty lines for transformers, cranes and boilers, the 6 steps our customs desk follows, and 5 errors that cost importers money. It is working guidance, not a legal ruling. The importer of record still owns the code it declares.

How is a Vietnam HS code built?

Read a code from left to right, and each level narrows the goods. Here is one transformer line from the 2026 tariff file:

LevelCodeWhat it means
Chapter85Electrical machinery and equipment
Heading85.04Electrical transformers, static converters and inductors
Subheading8504.22Liquid dielectric, above 650 kVA and up to 10,000 kVA
Vietnam line8504.22.93High side voltage of 66 kV or more, but less than 110 kV

A seller’s 6-digit code stops one level too early. In this subheading, the last 2 digits change the most-favored-nation (MFN) duty from 5% to 25%.

Rule change in 2026: Circular 85/2026/TT-BTC took effect on 15 September 2026 and replaced Circulars 14/2015 and 17/2021 on classification. Article 4 keeps the base rule: one goods item takes a single code. Read the circular in English.

Chapter 84 or Chapter 85: where does your machine belong?

Start with what the machine does, not how it is powered. An electric motor alone does not move a pump to Chapter 85. A pump driven by a motor still classifies as a pump, in heading 84.13.

  • Chapter 84 (1,316 lines, 721 at 0% MFN): boilers, turbines, pumps, compressors, cranes, excavators, machine tools and process plant.
  • Chapter 85 (896 lines, 358 at 0% MFN): motors, generating sets, transformers, switchgear panels and electric furnaces.
  • Neither chapter: a crane lorry sits in Chapter 87 (8705.10.00). Steel storage tanks sit in 73.09, gas vessels in 73.11 and wind towers in 7308.20.

Energy source can still decide the heading. An industrial furnace that runs on electricity belongs in 85.14, while a non-electric one goes to 84.17. That is why we ask for the data sheet before we name a code.

Large steel shell about 3.8 m across on a Project Shipping lowbed, Trang Bom to Chau Duc, where function decides the HS code
A steel shell about 3.8 m across on our lowbed, Trang Bom to Chau Duc, March 2026. A shell like this could be a tank, a vessel or part of a machine. Its function decides the chapter.

Worked example: the Vietnam HS code for a power transformer

Transformers show how much the last digits matter. All rows below are liquid-dielectric transformers, such as oil-immersed units, and exclude step-voltage regulators. The rates come from our 2026 tariff file.

TransformerVietnam HS codeMFN dutyPolicy flag in the file
400 kVA, 22 kV8504.21.995%Energy efficiency and labeling
5,000 kVA, 35 kV8504.22.9915%Energy efficiency and labeling
5,000 kVA, 66 kV8504.22.9325%Energy efficiency and labeling
10,000 kVA, 110 kV8504.22.925%Energy efficiency and labeling
12,000 kVA8504.23.105%None shown
40,000 kVA (40 MVA)8504.23.295%None shown

On a 5,000 kVA unit, moving from 35 kV to 66 kV adds 10 points of duty. At 110 kV the same unit drops back to 5%. A wrong voltage on the invoice is an expensive typing error.

Assembled oil-immersed power transformer with radiators and bushings beside a 110/22 kV substation in Vietnam
An assembled oil-immersed transformer with radiators and bushings fitted, beside a 110/22 kV substation gate in southern Vietnam.

A certificate of origin can change the picture. On line 8504.22.99 the file shows 0% under the Japan and EU agreements and 0% under Form E, with an exception for Thailand. Korea shows 5% and RCEP shows 7.5%.

Dry-type units leave this group. Those above 500 kVA go to 8504.34, where most lines show 10% and explosion-proof lines show 3%.

The rating is not hypothetical for us. In April 2024 we trucked a 40 MVA, 110 kV transformer about 1,900 km by road, from Cam Pha to Binh Tan substation in Vinh Long. That was a domestic road move from the factory, so no import code applied. See the route and skid plan in our power transformer transport guide.

Not sure which line your machine falls on?

Send the catalogue, nameplate photo, invoice description and origin. We reply with the likely HS lines, the duty on each and the policy flags within 2 working hours.

Vietnam HS code table for common project cargo

Use this as a starting point when you budget. Rates are MFN import duty from the ECUS 2026 tariff file dated 3 October 2026. Confirm your line against the actual specs before you file.

CargoCodeMFNWhat decides it, or what to watch
Excavator, 360° rotation8429.52.000%Rotating superstructure. Used units face age limits.
Crawler bulldozer8429.11.000%Track-laying type
Mobile crane on tires8426.41.000%Certificate flagged before clearance
Crawler crane8426.49.000%Certificate flagged after clearance, before market use
Crane lorry8705.10.003%Chapter 87, with a certificate before clearance
Tower crane8426.20.000%Often shipped in sections
Overhead crane on fixed supports8426.11.005%Not the same line as gantry cranes (8426.19.30, 0%)
Watertube boiler above 45 t/h8402.110%Steam output in t/h
Watertube boiler up to 45 t/h8402.125%Steam output in t/h
Steam turbine above 40 MW8406.81.000%Output in MW
Gas turbine above 5,000 kW8411.82.000%Output in kW
Diesel generating set above 375 kVA8502.135%Quality check flagged
Wind generating set8502.310%Trade remedy flag on towers from China
Machining center8457.100%Spindle power splits the line
Industrial robot8479.50.000%Only if no more specific heading fits
Switchgear panel above 1,000 V8537.205%Panels up to 1,000 V (8537.10) range from 0% to 15%
Steel tank, not for gas73.095%Chapter 73, unless mechanical or thermal equipment makes it a machine
Large steel gas vessel7311.00.990%Small cylinders on nearby lines show up to 20%
Wind tower7308.20.11, .193%Anti-dumping duty if from China, see below

VAT is separate. The general rate is 10%, with a temporary cut to 8% on many goods through 31 December 2026 under Resolution 204/2025/QH15. The file shows “8/10” on these lines, so check the rate that applies to your goods. Our machinery import guide covers how duty and VAT are budgeted.

Why 3% can become 97%: wind towers from China show 3% MFN, but Decision 3453/QD-BCT added a definitive anti-dumping duty, reported at about 97% for five years, with one producer exempt. It also reaches towers imported with a generator under 8502.31. Read the policy column, not only the duty column.

6 steps to find the right Vietnam HS code

This is the order our customs desk follows, in short form. Starting at step 5 skips the notes that can move your goods to another heading.

1. Define the goodsWhat it is, what it does, how it works, complete unit or part. Get the catalogue before you guess.
2. Find the chapterUse function and material. Chapter titles are for reference only.
3. Read the notesSection XVI and chapter notes can exclude your goods or send them elsewhere.
4. Apply the 6 general rulesRule 1 comes first. Move on only if the heading text and notes do not settle it.
5. Go down to 8 digitsCompare subheadings at the same level. Check capacity, voltage and output against the line text.
6. Check policy and record whyRead the policy column, compare earlier declarations and note the basis for your choice.

Two codes may still look possible. In that case we list both, with the duty on each, and settle it with the importer before anything is filed. Past declarations help, but another forwarder’s code is only a clue because it may have been wrong.

Complete machines, sets and parts: how does one code cover many crates?

Project cargo rarely arrives as one piece, and this is where a Vietnam HS code gets argued. Four rules do most of the work:

  • Disassembled machine: general rule 2(a) treats it as the complete machine. Article 8 of Circular 85 applies this to unassembled machinery.
  • Composite machine: Section XVI Note 3 classifies by principal function. Article 7 of Circular 85 addresses Chapters 84, 85 and 90.
  • Functional unit: Section XVI Note 4 covers separate components that together perform one clearly defined function.
  • Parts: Section XVI Note 2 puts parts named in their own heading there first, and parts made solely or mainly for one machine with that machine.

Take a boiler like the one above. Boiler casings and other boiler parts show 0% (8402.90), and a heat exchange unit shows 3% (8419.50). A complete watertube boiler up to 45 t/h shows 5%.

Declaring a complete boiler crate by crate at the lower rates invites a challenge under rule 2(a). The right line depends on what the goods really are: a complete boiler or separate parts. Some boiler modules may also point to heading 84.04, auxiliary plant for boilers.

Timing matters too. Press reports on Circular 85 say goods in Chapters 84, 85 and 90 arriving in one shipment no longer need the registered list and deduction sheet. For a disassembled machine or machine set split across shipments, the list goes in before the first declaration is registered.

Tower crane sections on a 40 ft flat rack on a Project Shipping lowbed leaving Cat Lai at night
Tower crane sections on a 40′ flat rack, on our lowbed from Cat Lai toward National Route 13, March 2026. Sections of a complete crane follow the crane’s heading.

The Vietnam HS code also decides your paperwork

Duty is only half of what the code controls. The same 8 digits can trigger permits, inspections or an extra duty, and these can hold a machine at Cat Lai longer than the duty payment would.

  • Used machinery: age limits run by HS heading. The general limit is 10 years, and some listed groups have 15 or 20. See the age limit table.
  • Mobile equipment: quality and safety certificates can apply before clearance (tire cranes) or after clearance and before market use (excavators).
  • Transformers: energy efficiency and labeling flags sit on the 8504.21 and 8504.22 lines above.
  • Trade remedies: an anti-dumping duty can apply by product and origin, whatever the MFN rate says.
  • Certificate of origin: the preferential rate depends on the origin rules for that code, so check the code on the C/O against your declaration.

Our customs clearance guide shows how these checks fit with the document list and green, yellow and red channels.

When is an advance ruling worth it?

Ask for one when the machine is high value, two lines look possible and the duty gap is large. The 25% and 5% transformer lines above are a good example. The importer applies to Vietnam Customs before the goods ship, using Form 01/XDTMS/NVTHQ with technical documents, plus samples where relevant.

Plan for 60 days: a customs reply reported in October 2026 confirms the complete file must arrive at least 60 days before import or export, under Decree 167/2025/ND-CP. An application dated 7 September for a shipment on 1 October failed that test.

The same reply flags a second problem: the form stated one use and the technical documents another. Have the engineer check the description before you file. A ruling is only as useful as the specs behind it, so it will not protect goods that differ from what you described.

5 Vietnam HS code mistakes that cost machinery importers

  • Using the seller’s export code. It may stop at 6 digits, or suit the seller’s country and not Vietnam’s line.
  • Writing only “machine” or “equipment” on the invoice. Without capacity, voltage and function, customs has to ask and your cargo waits.
  • Assuming machinery is duty-free. In our file 595 Chapter 84 lines and 538 Chapter 85 lines carry MFN duty above 0%.
  • Splitting a production line across many codes. Crates that form one machine or set need a plan and a registered list where required.
  • Checking the duty and skipping policy. A 0% line can still need a certificate, and a 3% line can carry 97%.

Where can you look up a Vietnam HS code?

Our free HS code lookup covers 11,871 eight-digit codes. The interface is in Vietnamese, but each code also shows its English description, with duty, VAT and origin rates. Type 84 or 85 to browse a chapter.

  • Legal text: the WCO HS 2022 page has the Section XVI and chapter notes. Notes outrank chapter titles.
  • Vietnam’s rules: Vietnam Customs publishes procedures and classification notices.
  • Free third-party sites: useful for a first look, but some show the wrong digit count or older rates. Always confirm against the current tariff.

Vietnam HS code FAQ

How many digits does a Vietnam HS code have?
Eight. The first 6 follow the international HS system, and the last 2 come from the ASEAN nomenclature used in Vietnam’s list. Duty and policy are read at the 8-digit line, so a 6-digit code from a seller is not enough.
Is machinery duty-free in Vietnam?
Not automatically. In our 2026 tariff file, 721 of 1,316 Chapter 84 lines and 358 of 896 Chapter 85 lines show 0% MFN. The rest carry duty, such as 25% on some transformer lines, so check your exact line and origin.
Can I use the HS code from my supplier’s invoice?
Use it as a clue only. The exporting country may read the goods differently, and the last 2 digits are specific to Vietnam’s list. Customs classifies by the nature and function of the goods, not by the code on the invoice.
Who decides the HS code on a Vietnam import?
The importer of record declares the code, often through a customs agent, and carries responsibility for it. Customs can check the code and reassess it. For a complex machine, the importer can apply for an advance ruling at least 60 days before import.
What HS code applies to a machine shipped in many crates?
A disassembled machine is generally classified as the complete machine under general rule 2(a). If it arrives over several shipments, register the list before the first declaration. Crates that are really separate goods may need their own lines.
Do you give a binding HS code?
No. We give a working view with the likely lines, duty on each and policy flags, based on your documents. Only Vietnam Customs can issue a binding answer, and the importer approves the declaration.
Will you contact our customer directly?
We contact the consignee only for customs and delivery, as you instruct. We never contact your customer for sales. Updates and photos go to you.

Related pages

Import machinery to Vietnam

Used-machine age limits by HS heading, proof customs need, duty and VAT.

Machinery import guide →

Customs clearance in Vietnam

Document checklist, inspection channels, timeline and fees for machinery.

Customs guide →

Power transformer transport

Real 40 MVA and 110 kV moves: permits, night arrival and skidding.

Transformer transport →

Heavy haulage in Vietnam

Lowbeds, road permits and route surveys after your cargo clears customs.

Heavy haulage →

Get a second look at your HS code

Send the catalogue, nameplate photo, invoice description, origin, L×W×H and weight. You get the likely lines, duty, policy flags and an all-in clearance and trucking cost within 2 working hours. Freight agents: see how we work with agents.

Tony Tuan, CEO: WhatsApp +84 909 411 668 · ceo@projectshipping.vn
Overseas Department: WhatsApp +84 909 411 668 · ceo@projectshipping.vn
Calling from Vietnam: 0909 411 668

Last updated: November 2026

Request a quote Reply within 2 working hours · plan and net rate in one message

We use your details only to answer this request. We never contact your customer.

DOWNLOAD BẢNG GIÁ